美国Inspector核辐射检测仪-环境检测-仪器设备-生物在线
上海孟良仪器技术有限公司
美国Inspector核辐射检测仪

美国Inspector核辐射检测仪

商家询价

产品名称: 美国Inspector核辐射检测仪

英文名称:

产品编号: Inspector

产品价格: 0

产品产地: 美国

品牌商标: S.E. International,Inc

更新时间: null

使用范围: null

上海孟良仪器技术有限公司
  • 联系人 :
  • 地址 : 联航路1188号7-i205室
  • 邮编 :
  • 所在区域 : 上海
  • 电话 : 133****1773 点击查看
  • 传真 : 点击查看
  • 邮箱 : 675752949@qq.com

900+核辐射检测仪|德国核辐射检测仪|进口核辐射检测仪|900核辐射检测仪|核辐射检测仪|防辐射检测仪|防辐射检测|核辐射测定仪|国产核辐射检测仪| 便携式核辐射检测仪|核辐射检测仪报价|自制核辐射检测仪|核辐射检测仪价格|核辐射检测仪原理|手持核辐射检测仪|手持式核辐射检测仪|人体核辐射检测仪|民用核辐射检测仪|核辐射检测|辐射检测仪|辐射检测|辐射检测仪价格|手机辐射检测|核辐射检测仪|民用核辐射检测仪|手持式核辐射测量仪|辐射检测价格

美国Inspector核辐射检测仪报价,辐射监测仪,α、β、γ和X辐射剂量率检测仪价格,手持式数字辐射报警探测仪报价,放射物检测仪价格,核电站安全放射性物质检测仪,美国SE公司制造,α、β、γ和X多功能射线检测仪Inspector EXP+价格,辐射测量仪器价格,美国S.E. International,Inc美国Alert手持式α、β、γ和X辐射剂量率检测仪,α、β、γ和X辐射剂量率检测仪

美国Inspector核辐射检测仪报价 α、β、γ和X辐射剂量率检测仪(外置探头)

    可广泛用在核电站、制药厂、实验室、发电厂、采石场、紧急状况营救站、金属处理厂、地下油田和供油管道装备、环境保护、卫生监督等部门。

    Inspector EXP多功能射线计量仪为您提供了快速、 精确、便捷的辐射检测手段。它带有很长的外接G-M 计数管探头,有效的保护了测量人员的安全,既可做辐射剂量率检测又能用于表面污染测量,本产品采用GM探测方法,用以监测放射性工作场所和表面,实验室的工作台面、地板、墙壁、手、衣服、鞋的α、β、γ和X放射性污染计数测量以及环境剂量率,是一款性价比高的辐射测量仪器。

特点:

  1. 轻便小巧的手持式微处理器控制的高灵敏度仪器
  2. 可检测α、β、γ、Χ射线,并能直接读出射线水平读数
  3. 能进行计数测量、总计数测量和剂量率测量
  4. 用户可自行设定报警值,并可进行外部校准控制
  5. “安全第一”(Safety First)的校准功能能够避免校准人员的辐射接触
  6. 检测仪符合欧洲CE认证要求

应用于:

  1. 检查局部的辐射泄露和核辐射污染
  2. 检查周围环境的氡辐射
  3. 检查石材等建筑材料的放射性
  4. 检查有核辐射危险的填埋地和垃圾场
  5. 检测从医用到工业用的X射线仪器的X射线辐射强度
  6. 检查地下水镭污染
  7. 检查地下钻管和设备的放射性
  8. 监视核反应堆周围空气和水质的污染
  9. 检查个人的贵重财产和珠宝的有害辐射
  10. 检查瓷器餐具玻璃杯等的放射性
  11. 精确定位辐射源
  12. 家居装饰的检测

技术参数:

探 测 器
卤素淬灭剂GM管,有效直径45mm,云母窗密度1.5-2.0mg/cm2
显  示
四位数值液晶显示,模式指示
平均周期
3秒更新读数,正常辐射强度下显示前30秒的平均值。如果辐射强度增强,30s的平均周期将缩短。用户可以选择最短3秒的平均周期
测量范围
0.001-100.0mR/hr,0-300,000CPM,总计1-9,999,000counts,0.01-1,000mSv/hr,0-5,000CPS
效  率
Sr-90(546KeV, 2.3MeV βmax)约75%;C-14(156KeV βmax)约11%;Bi-210(1.2 MeV βmax)约64%;Am-241(5.5MeV α)约36%
灵 敏 度
3500CPM/mR/hr(对于137Cs)
精  度
±15%
计 时 器
可以设置取样时间为1到10分钟(增量1分钟)、10-50分钟(增量10分钟)或1-24小时(增量1小时)
计 数 灯
对每个辐射事件,红色LED闪烁
声  音
对每个辐射事件,蜂鸣器声音提示。可以设置成静音
输  出
两用微型插孔用于驱动CMOS或TTL设备,发送计数到计算机或数据记录器。超微型插孔用于电子校准
抗 饱 和
在超过最大读数达100倍的场合,读数保持在满刻度
温度范围
-10-+50℃
电  源
1节9V碱性电池,在一般本底下可用200h以上,在1mR/hr情况下可用24h以上
尺寸重量
150×80×30(mm),350g(含电池)

英文介绍

Inspector EXP+ Handheld Digital Radiation Alert® Detector a ß y x
The Inspector EXP was designed to meet the requirements of emergency response personnel. It has the same valuable features, small size, and quality of the Inspector. However, instead of the built-in detector, it has the added versatility of an external probe. The carrying case has a clear window panel providing full view of the readout, count light, access to the switches, and a convenient belt loop for carrying the instrument. A small pocket is provided for a check source. The protective probe cover on the uniquely designed carrying case folds easily out of the way to allow one-handed operation if desired.
 
Specifications
Detector
RAP-RS1 Probe - External Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 areal density. Effective diameter of window is 45 mm (1.75 in.). Radiation symbol on front label marks the center of the detector.
Display
4 digit liquid crystal display with indicators.
Averaging Periods
Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases
Alert Set Range
mR/hr .001 - 50 and CPM 1 - 160,000.
70db @ 1m.
Count Light
Red LED flashes with each radiation event.
Audio Indicator
Internally mounted beeper (can be switched off for silent operation)
Outputs
Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration
Energy Sensitivity
Detects Alpha down to 2 MeV.Detects Beta down to .16 MeV; typical detection efficiency at 1 MeV is approx. 25%. Detects Gamma down to 10 KeV through the end window.
Anti-Saturation
Meter will hold at full scale in fields as high as 100 times the maximum reading.
Power Requirements
One 9-volt alkaline battery. Battery life is approx.
2160 hours at normal background.
Temperature Range
-10º to 50ºC (14º to 122ºF)
Weight
Inspector: 273 g (9.6 oz.)
Size
150 x 80 x 30 mm (5.9 x 3.1 x 1.2 in.)
Probe: 260 X 70 X 38 mm (10.25 X 2.75 X 1.5 in)
Probe Construction
Anodized aluminum housing
Size - Approx. 8.75 in. (22.23 cm) Dia.: 2.75 in. (7.0 cm)
Connector - Amphenol-Tucal
Handle - Black foam grip
Weight - Approx. 11.5 oz. (328 g) w/o cable 
Gamma Sensitivity
3340 CPM/mR/hr referenced to Cs137. Smallest detectable level for I-125 is .02 µCi at contact. Timer can set 1 minute sampling periods from 1 to 10 minutes.
Operating Range
mR/hr - .001 (1µR) to 100 mR/hr CPM - 0 to 350,000
µSv/hr - .01 to 1000 CPS - 0 to 5000
Total/ Timer - 1 to 9,999,000 counts
Accuracy
mR/hr ±10% typical (NIST), ±15% max - 0 to 100
µSv/hr ±10% typical (NIST), ±15% max - 01 - 1000
CPM ±10% typical (NIST), ±15% max - 0 to 350,000
(Referenced to Cs137)
Includes
Carrying Case, Cable for Inspector+ EXP: Beldon 9853 with Amphenol 31226 twinax. CE Certification.
Limited Warranty
1 year Limited Warranty, 90 day Limited Warranty on GM detector Utility Menu
The Utility Menu offers several options accessible by holding down the + button while turning the instrument on.
• 3 second (fast response)
• Switches from mR/hr and CPM to µSv/hr and CPS
• Reset the cal factor to 100.
• Adjust the CAL factor.
• Reset all setting to default factory setting.



www.menglianggroup.com