乐畅奇KDS 260P可编程四注射器推拉泵
This KDS pump provides simultaneous infusion and withdrawal with opposing syringes on a single drive. The KDS260 is an adaption of the KDS210. The pump has been modified to hold an additional syringe so that as one syringe infuses, while the second syringe withdraws at the same rate. The Push/Pull mode is designed for one cycle only.
此款注射泵能对一个传动杆上相对的注射器同时进行注入和抽取操作。KDS260是KDS210的加强改编版。这台注射泵一端放置注射器，在它背对的一端也放置注射器，那么当一端注射室，背对的一端以同样的速率同时抽取。推/拉模式仅用于一次循环。
注：不使用推/拉模式时，此泵具有KDS 210的所有功能。

Features特点:
 Holds up to four syringes, 10 µl to 60 ml each. With large syringes, the full volume may not be usable.
最多可放置4个注射器，每一个注射器10 µl到60 ml。大注射器可能无法使用最大容量。
 Backlit LCD display
LCD背光灯显示屏
 Knob locks/unlocks drive block for effortless, drag-free adjustment
锁定/解锁驱动块通过旋钮可轻松手动调节
 Simple menu-driven setup:
设置简单，菜单提示
1. select syringe size from displayed table
显示表格中选择注射器尺寸
2. dispense volume
注射量
3. dispense flow rate
注射速率
 Continuous dispense volume display
显示连续循环注射量
 Preset volume control and automatic shut-off
预设注射量，到达时会自动关闭
 Settings can be reviewed or changed during operation
运转时可以重新设置或改变参数
 Stall detection
失速检测
 Last settings stored in permanent memory
最后参数设置自动保存，下次开机时不需要再输入
 Built-in RS232C interface for computer "daisy chaining" up to 100 pumps
内置RS232C接口可连接电脑，可以串联100台泵
 TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
TTL接口可接脚踏开关、计时器、继电器控制、运行指示器输出、阀门
控制
 Independent rate and volume settings for infusion and withdrawal
注射和抽取的流速流量可单独设定
 Multiple mode selection:
可选择多种模式
 Withdrawal for push/pull
推/拉时抽取
 Multi-step keypad programmable feature (KDS260P)
多步骤键盘编程功能