显微镜镜头加热器
产品名称： 显微镜镜头加热器
英文名称： 显微镜镜头加热器,显微镜物镜加热器,显微镜加热器
产品编号： 显微镜镜头加热器,显微镜物镜加
产品价格： 0
产品产地： USA
品牌商标： 玉研仪器公司
更新时间： 2023-08-17T15:24:17
使用范围： null
- 联系人 : 方经理
- 地址 : 上海市闵行区兴梅路485号中环科技园301室
- 邮编 : 200237
- 所在区域 : 上海
- 电话 : 185****9044 点击查看
- 传真 : 点击查看
- 邮箱 : sales@yuyanbio.com
显微镜物镜加热器 OBJECTIVE HEATER
Features
Temperature controlled heating band
Easy installation around the objective
Fits any objective on the market
Compatible with the following OKOLAB Controllers:
H301-T-UNIT-BL-PLUS
UNO-T-H-PREMIXED
UNO-T-H-CO2
H401-T-CONTROLLER
Compatible with Inverted and Upright Microscopes
Self CalibrationRoutines with BL controllers
Voltage: 24 V
Power: 13 W
When should I use an Objective Heater
You should use an objective heater, if you:Perform Oil Immersion Imaging with a Top Stage Incubator
Use dipping lens with an upright Top Stage Incubator
Why should I use an Objective Heater?
Because, if you don't, sample temperature will drop due to oil contact with the cold objective, as shown in the following graph.
Step 1: Objective not in contact with Petri 2; Objective Heater Off.
Step 2: Objective in oil contact with Petri 2; Objective Heater Off.
Step 3: Objective in oil contact with Petri 2; Objective Heater on, Offset value 5.3°C.
During the self calibration routine, the offset value of the objective heater is progressively increased, until T2 reaches the desired set point temperature of 37.0°C.
Figure 3 reports the profile of T1, T2, and of Objective Heater Temperature during the experimental campaign described above.
您想了解更多详细资料吗？
请与我们联系：
TEL： 021-35183767 ， 18502129044
QQ ： 2113136797
Mail： yuyan0317@126.com
敬请来电咨询！
